Chorus

This is some kind of universal effect which can produce chorus-like effects. The operation is quite simple: JAZZ takes a copy of the original sample, then modifies it according to the settings in the dialog and finally mixes the modified copy back to the original.

• Delay - delays the signal for the number of seconds/100 specified here (e.g. a value of 20 means 200 millisec delay).

• Pitch Modulation Frequency - changes the pitch of the signal up and down controlled by a sine wave LFO (Low Frequency Oscillator), this is the heart of most chorus effects. The modulation frequency is set in Hertz/10 (that is, a value of 20 means 2 turnarounds per second). The modulation frequency corresponds to the speed regulator of a chorus effect.

• Pitch Intensity - the depth of pitch change.

• Pan Freq - changes the pan of the signal to the left and right controlled by a sine LFO.

• Stereo Spread - enhances the stereo effect of the output. You may even try to convert a mono signal to a stereo signal by setting Delay to 20 or so, turn pitch intensity and pan spread off and set stereo spread to maximum.

• Effect Volume - the volume of the modified signal in % of the original.